＋设为首页 ＋添加到收藏夹
contents
description
【相关文章:使用AJAX异步获取数据】 【扩展阅读:AJAX技术开发“Back”按钮问题的应】step-by-step procedure 【扩展信息:AJAX处理书签和翻页按扭的方法】 related informationdescriptionthis document describes the password recovery procedure for the following cisco products:
cisco 2000 cisco 2500 cisco 3000 cisco 4000 cisco accesspro cisco 7000 (rp) cisco ags cisco igs cisco sts-10xstep-by-step procedure
attach a terminal or pc with terminal emulation to the console port of the router. use the following terminal settings:
9600 baud rate
no parity 8 data bits 1 stop bit no flow controlthe required console cable specifications are described in the cabling guide for rj-45 console and aux ports (ciscos 1000 series, 2500 series, and as5100).
type show version and record the setting of the configuration register. click here to see output of a show version command.the configuration register setting is usually 0x2102 or 0x102.
using the switch, turn off the router and then turn it on. press break on the terminal keyboard within 60 seconds of the powerup to put the router into rommon. type o/r 0x2142 at the > prompt to boot from flash without loading the configuration. type i at the > prompt.the router reboots but ignores its saved configuration.
type no after each setup question or press ctrl-c to skip the initial setup procedure. type enable at the router> prompt.youll be in enable mode and see the router# prompt.
... 下一页